Skip to content

How to Clean Rust Out of a Motorcycle Gas Tank: Step-by-Step Guide

how to clean rust out of a motorcycle gas tank
Amazon Sponsored Links
Moto Deals Under $25 Affordable Thrills, Without the Spills
Bike Parts The Right Parts to Keep You on the Road
Bike Accessories Upgrade Your Ride, Elevate Your Style
Protective Gear Safety First, Adventure Always
Fluids & Maintenance Keep Your Ride Smooth, Keep Your Spirit High
Vehicles Where Your Next Adventure Begins

1. Removing the Gas Tank

Alright, my thrill-seeking amigos! Let’s roll up those sleeves and dive straight into the world of motorcycle maintenance. But hey, let’s not forget the golden rule here: safety first, high-octane thrills second.

So you’re standing there, staring down at your beloved motorcycle, wondering, “how to clean rust out of a motorcycle gas tank“... yes, it’s a real quandary, isn’t it? Fear not! We’ll start by removing the gas tank, that beastly barrier to our victory against rust.

First things first, disconnect the battery. We do NOT need Thor’s lightning bolts zapping us halfway through this process. Once you’ve done that, disconnect the fuel lines from the gas tank. Pro tip: keep a container handy for any rogue gas that decides to make a break for it.

Now, onto the bolts. Unbolt that tank from your motorcycle with all the finesse of a ballet dancer but the grit of a heavyweight champ. Remember, this is your motorcycle showing its vulnerability to you; handle it with care.

Alright, good job, folks! You’ve successfully removed the gas tank. But don’t start the victory dance just yet, we’ve got some rust to handle! You’ll be wrestling with that beast in the next steps. However, keep the faith, your motorcycle will thank you for your persistence!

2. Emptying and Cleaning the Gas Tank

By now, you’re holding that gas tank in your hands like a newborn baby, albeit a heavy, metallic, rusty baby. That’s the spirit! Now let’s get onto the next stage: emptying and cleaning the gas tank.

Begin by emptying any leftover fuel. Remember, fuel isn’t just some frivolous liquid you can pour down the drain; it’s a valuable and hazardous resource. Use a siphon pump to transfer the remaining gasoline into a proper gas can. Do it outside in a well-ventilated area, unless you’re a fan of “instant garage makeover by explosion”.

Once you’ve safely emptied your gas tank, it’s time to break out the secret weapon in our quest to combat rust: the humble dish soap. Fill the tank with warm water, squirt in a generous helping of soap, and give it a good ol’ shake. Imagine you’re an overworked bartender, and this motorcycle tank is the cocktail shaker of your dreams.

Drain the soapy water after your impromptu bartending session and brace yourself for the grand reveal. Use a flashlight to inspect the interior of the tank. Are there rust particles floating around like a bad case of undersea debris? Is the water looking more like a rustic painting than clear liquid? If so, then congratulations, you’ve just encountered rust in its natural habitat. But don’t worry, our journey doesn’t end here.

Now for the cleaning part. Get yourself a handful of drywall screws or BBs. Why, you ask? Well, remember when you asked “how to clean rust out of a motorcycle gas tank”? Here’s the fun part. Drop those screws or BBs into the tank, add a dash of dish soap, some warm water, and shake that tank like it’s a maraca at a salsa festival. The abrasiveness of the screws will scrape off the rust, while the soap and water wash it away.

After your arm workout, empty the tank and rinse it out until the water runs clear. Remember to breathe a sigh of relief as you witness the final eviction of rust from your gas tank. Then pat yourself on the back. You’ve officially completed the “emptying and cleaning” stage. Give your tank (and yourself) a good rest before moving onto the next step. Rust removing, here we come!

3. Applying a Rust Remover Solution

Amazon Sponsored Links
Motorcycles and Powersports Rev Up Your Ride, Elevate Your Experience
Today's Deals Speed Through Savings, Catch Them Before They're Gone!
Best Sellers Quality Rides Start Here: The Gear You Can Trust
Top Rated Quality Rides Start Here: The Gear You Can Trust
Hot New Releases Be the First to Ride the Future
Under $25 Affordable Thrills, Without the Spills

Alright, my brave rust-battling comrades, our gas tank is clean and waiting to be pampered with a bit of rust remover solution. This step is a bit like going to the spa for your motorcycle tank. Instead of a mud mask, we’re using a rust remover solution to reveal a brand new, shiny, rust-free complexion.

First, snag yourself a commercial rust remover. Choose one that’s safe for metal surfaces; we don’t want to have come this far just to damage our trusty gas tank. Think of it as selecting a fine wine, but instead of savoring the taste, we’re savoring the sight of vanishing rust.

Pour the rust remover into the gas tank as if you’re filling it with liquid gold. Because, in our world, that’s exactly what it is. Ensure it covers every rusty corner by swishing and swirling it around, sort of like a seasoned wine connoisseur.

And now, we wait. Let the rust remover sit and do its magic. I know, it’s like watching paint dry, or waiting for the last season of your favorite TV series. But remember, “how to clean rust out of a motorcycle gas tank” is the quest we are on. Patience, grasshopper.

Once our time is up (check the remover’s instructions for this, it’s not a random guess!), it’s time to drain. Pour out the rust remover carefully – remember, it’s not a friendly liquid. Wear gloves and eye protection, unless you’re interested in a new eyeshade called “Rust Remover Red”.

After the rust remover has bid its farewell, inspect the tank. If it’s gleaming like a knight’s armor in a fairy tale, celebrate! If not, rinse and repeat. Literally. Rust can be a stubborn villain, but we’re relentless heroes!

There you go, folks! Rust remover solution applied and rust obliterated. Stay tuned, though. We’re just gearing up to rinse and dry this gas tank, prepping it for its grand return to your majestic motorbike.

4. Rinsing and Drying the Gas Tank

Brace yourselves, brave motorheads, for the next thrilling chapter in our rust-busting saga: The grand rinsing and drying of the gas tank. This is where we bid adieu to the last vestiges of rust, with a flourish of water and air.

First things first, let’s give the tank a thorough rinse. This is like the grand splash finale at the water park of our “how to clean rust out of a motorcycle gas tank” adventure. Grab your trusty hose (or any other water source) and flush out the remaining rust and rust remover from the tank.

Remember, folks, we want to get all the rust out, so give it a good shake, twirl, even a dance if you want. Picture yourself in a shampoo commercial, but instead of luscious locks, we’ve got a gleaming gas tank. And, just like rinsing out the shampoo, we need to repeat this step until the water runs clear. Pure as a mountain spring, or the tears of joy you’ll shed when your motorcycle is rust-free!

Next up, drying. Like basking in the sun after a dive in the ocean, the tank needs a little me-time in a dry, warm environment. But this isn’t a leisurely sunbathe – we want to ensure every droplet of moisture is gone to prevent – you guessed it – more rust. Not on our watch!

If you’re an impatient soul (we’re not judging), a hairdryer can work wonders. If you’ve got compressed air at hand, even better! Just be careful not to let the heat linger too long in one spot, or you’ll end up with a hotspot on your tank, and not the fun, WiFi kind!

Once your tank is drier than a comedian’s wit, give it an inspection. It should look like the day it rolled off the factory floor – if it doesn’t, you know what to do. Rinse, dry, repeat!

And there we have it, the glorious rinsing and drying phase complete. Onward, to the grand finale of reinstalling and preventive measures. Our rust-free, shiny gas tank is nearly ready to rejoin the motorcycle from whence it came!

How to REMOVE RUST for $1- (HOW TO CLEAN A GAS TANK) – motorcycle gas tank pt.1

5. Reinstalling the Gas Tank and Preventive Measures

Congratulations, dear motorcyclists! You’ve made it to the grand finale of our epic “how to clean rust out of a motorcycle gas tank” adventure. So, grab your tools, let’s reinstall the gas tank and roll into the sunset!

With the dexterity of a ballet dancer, reinstall the gas tank onto your bike. Be gentle, kind, and considerate to the newly cleaned and restored tank. Treat it like a first date. And remember, forcing anything at this point is a big no-no. If something doesn’t fit, step back, take a deep breath, and try again.

Okay, so we’re back in business, but we’re not quite finished yet. We’ve vanquished rust this time, but let’s make sure it doesn’t return, shall we?

Prevention is the best cure, and there are a few nifty tricks to keep the rust at bay. Using a fuel stabilizer, especially when storing your bike for a while, can help to prevent rust. It’s like your tank’s personal bodyguard, fighting off the rust hooligans.

On the topic of storage, always store your motorcycle in a cool, dry place. And no, this does not mean your bedroom (unless you live in a warehouse).

A final trick from the wizards of motorcycle maintenance – consider coating the inside of your tank with a tank sealer. It’s like applying a protective sunblock to prevent a burn. Rust, like the sun, can be relentless.

Alright folks, that’s a wrap. Your motorcycle gas tank is now clean, rust-free, and protected for the future. And that, my friends, is how you clean rust out of a motorcycle gas tank. Now, strap on your helmets and ride into the sunset, you glorious rust-free knights of the road!

Amazon Sponsored Links
Motorcycles and Powersports Rev Up Your Ride, Elevate Your Experience
Today's Deals Speed Through Savings, Catch Them Before They're Gone!
Best Sellers Quality Rides Start Here: The Gear You Can Trust
Top Rated Quality Rides Start Here: The Gear You Can Trust
Hot New Releases Be the First to Ride the Future
Under $25 Affordable Thrills, Without the Spills